Knowledge Base

Search by either entering keywords or by selecting a product.

Using AOSS on a Buffalo AirStation

You can use the physical AOSS button on your AirStation to easily connect wireless devices that support AOSS or WPS. Consult your wireless device's documentation for the location of its AOSS or WPS button. If you already have a wireless network that was configured without using AOSS or WPS, connecting a new device with AOSS will change its settings, disconnecting any previously connected wireless devices.

  1. Power on the AirStation.
  2. Hold the physical AOSS button down for two seconds, then release it.
  3. For the next 2 minutes, the wireless LED will flash and the AirStation will automatically search for a nearby AOSS/WPS device. The AirStation will automatically return to normal if a device isn't found after 2 minutes.
  4. Push the AOSS/WPS button on the wireless device. It should be automatically connected within 2 minutes.

You can repeat this for all AOSS/WPS devices you are attempt to connect with. If setup doesn't work, open the AirStation's Settings page and make sure that the AOSS physical button is enabled.